|
 |
| SIGMA NILES ENGINE LATHE
MODEL # DLZ800/III 37x160
Featuring:
- Sigma Niles Engine Lathe, new in 1968
- Max. swing over bed 37”
- Max, swing in gap 43”
- Length of gap in front of faceplate 12.2”
- Max. swing over cross slide 24.5”
- Spindle bore 3.54”
- Bed width 27.95”
- Size of centers No.6 M.T.
- Tailstock quill diameter 4.92”
Sides of four-way tool block 9.84”
- 18 Spindle speeds 14-710 RPM
- 38 longitudinal feeds .0020-.1398 IPR
- 38 cross feeds .0007-.0492 IPR
- Thread Range:
Inch 2-28 T.P.I.,
Metric 1-14 mm.
Diametral 8-112
- Weight capacity between centers 8,818 lbs.
- Weight capacity with 1 steady rest 11,023 lbs.
- Weight capacity with 2 steady rests 13,889 lbs.
Equipped with:
- Swivel compound with built-in 4-way toolpost and power rapid traverse
- Inch/Metric threading
- Thread dial
- 31” dia. 4-jaw chuck
- Short gap in bed
- 15” dia. 3-jaw universal chuck
- Back plate for chuck
- T-Slotted rear-rest
- 9.84” Dia. capacity 3point roller steady rest
- 19.6” Dia. capacity 3point roller steady rest
- Headstock adapter sleeve with dead center
- (3) live centers
- Pan bed and coolant
- 40 HP AC Main drive motor with control cabinet
- Wired for 3/60/440 Volt operation
Note Machine appears to be in Very Good Condition |
| Specifications: |
DLZ800/III 37x160 |
| Swing over bed |
37" |
| Swing over cross slide |
24.5" |
| Swing over gap |
43" |
| Center Distance |
160" |
| Width of bed |
27.9" |
| Spindle hole |
3.54" |
| Spindle RPM |
14-710 |
| No. of spindle speeds |
18 |
| INCH threads |
2-28 tpi |
| METRIC threads |
1-14 mm |
| Main motor, AC |
40 HP |
|
|
 |
© 1999-2010,
emachinetool.com 262 Eastgate Dr., # 304, Aiken, SC 29803.
Toll Free Phone: 888-808-0850, Toll Free Fax: 888-808-0861, Phone: 803-480-6629, Fax: 803-753-0117
Site Created by Revolutionary Systems.
|
