emachinetool.com
1-888-808-0850info@emachinetool.com
 | Home | Register | New CNC | New Conv | Used CNC | Used Conv | Accessories | Leasing | Service | Order Tracking |

Building Trust in Transactions (tm)
Search Here:
Credit Cards
Home >> New CNC Machines >> CNC Lathe >> Femco HL35 CNC Lathe

 
Femco Model HL35 CNC LATHE

Specifications: HL35 Specifications: HL35
Chuck size 10"   Swing over bed 24.5"
Max. turning dia. 14.2"   Max. turning length 25.3"
Tooling 12 pos. turret   Spindle bore 3.42"
Bar capacity 2.95"   Spindle HP 25/20
Spindle nose A2-8   Spindle RPM 4000
No. of speed ranges 1   Tool OD & ID size 1x1"&2"
Type of ways Linear   CNC control Fanuc 18TC
Tailstock quill dia. 4.72"   Tailstock quill travel 4.72"
Programmable tailstock Body & Quill   Net weight 14,300 lbs.
Country of Origin Taiwan    
Delivery Information:
3-4 days.

Three Free and Easy Services:
emachinetool.com provides 3 easy and free services to assist you in your complete buying and selection process. To lean more, Click here.
       
 
FEMCO MODEL HL35 HIGH SPEED PRECISION CNC LATHE

Featuring:

  • The HL35 is a powerful, large capacity lathe that can turn small through large lot parts. The huge turret casting incorporates an oversized curvic coupling. The HL35 can cut from 1/16” to 14.2” diameters and up to 25.2” lengths in a wide variety of materials.
  • The 12 station turret is a proven and a mature design. It’s bi-directional turret and selects the shortest path to the next tool thereby minimizing non-cutting time. The main casting housing is oversized casting and incorporates a large curvic coupling.
  • The bed, a solid one piece casting, is made from close grain Meehanite cast iron. The ribbing locations and wall thickness are placed in strategic locations determined by computer finite analysis. This design allows consistent accuracies and excellent finishes. The saddle has a 45-degree incline, directing chips and coolant in to the available chip conveyor.
  • The headstock is made using close grain Meehanite cast iron. It is equipped with six, class 7 precision bearings that are grease lubricated. The large 3.42" spindle hole, permits up to 2.95” bar stock.
  • The HL35 features a high torque 25/20 HP Fanuc AC spindle motor makes heavy stock removal simple and fast, while minimizing the number of roughing cuts required. This powerful AC digital spindle drive system offers superior spindle acceleration, while maintaining excellent low-end torque. The gearless spindle transmission eliminates spindle vibration for high quality finishes.
  • Both the X and Z axes are driven by Fanuc AC Digital Servo Motors. They are directly coupled to high precision ball screws and supported at both ends, by angular contact thrust bearings. This double supported design assures excellent positioning accuracy, repeatability and minimizes thermal growth.
  • The hydraulic tailstock is programmable and has an adjustable quill.
  • Lubrication is automatically metered to the guideways, ballscrews and tailstock quill. Lubrication to these critical areas and the volume is precisely metered. A low lube level alarm is generated, which prevents the machine from restarting, if the level of oil is below its safety level.
  • The HL35 is equipped with a high volume type coolant pump motor. The 12-station turret uses several methods of directing the coolant exactly where it is needed. The tool holders, have been designed to allow the user determine the way the coolant can best be utilized. For ID holders the coolant is directed through the tool (such as needed for deep hole boring applications). The holder can use flexible coolant lines, which come out of the size of the holder. If a sleeve is being used, the operator can direct coolant under or above the tool. For OD holders, the operator simply blocks the ID hole and directs coolant to the OD tool.

    Specifications:
  • Swing over bed – 24.5”
  • Distance between centers - 25.2“
  • Maximum turning diameter – 14.2“
  • Maximum turning length – 25.3“
  • Spindle nose - A2-8
  • Spindle speed - 4,000 RPM
  • Spindle power – 25/20 HP
  • Hole through spindle – 3.42“
  • Bar capacity - 2.95“
  • Chuck diameter - 10“
  • Turret type - single disc, bi-directional shortest path
  • Total no. of tools - 12
  • Tool size OD – 1 x 1”
  • Tool size I.D. maximum - 2“
  • Coolant - on the tool or through the tool
  • Tailstock quill diameter – 4.72“
  • Tailstock quill stroke – 4.72“
  • Tailstock spindle taper - MT #5
  • Weight – 14,300 Lbs.
  • Voltage required - 220 volts,3 phase, 60 Hz.
  • Amp Wall Breaker - 80 Amps
  • Full Load Amps – 60 Amps

    • Standard Fanuc 18T-C CNC control features:
  • 9" Monochrome CRT
  • Background editing
  • 63 Stored part programs
  • Manual pulse generator
  • Tool geometry and wear compensation (offset)
  • Tool nose radius compensation
  • 32 pairs of tool offsets
  • Simultaneously controllable axis: 2
  • Tape storage length: 80 m.
  • Registerable programs: 63
  • Minimum programmable increment: 0.0001"
  • Backlash compensation
  • Self diagnostic functions
  • Positioning rapid (G00)
  • Linear interpolation (G01)
  • Circular interpolation (G02-G03)
  • Tool nose radius compensation (G40 G41 G42)
  • Multiple repetitive cycles (G70,G71,G72,G73,G74,G75,G76)
  • Canned cycles (G90,G92,G94)
  • Reference point return (G27,G28,G29,G30)
  • Inch/Metric conversion (G20,G21)
  • Thread cutting (G32)
  • Coordinate system setting
  • Dwell (G04)
  • Constant surface speed (G96,G97)
  • Feed per minute (G98)
  • Feed per revolution (G99)
  • Single block
  • Block delete
  • Dry run
  • Optional stop
  • Edit lock

    • Standard machine items:
  • Fast bi-directional turret indexing
  • Compact design requires minimal space
  • 10" 3 jaw hydraulic chuck with set of hard top and soft jaws
  • Hydraulic actuator
  • Hydraulic system
  • Hydraulic tailstock with programmable quill
  • Work light
  • Automatic lubrication system
  • Coolant system (42 gallon capacity)
  • Full chip and coolant enclosures
  • Complete set of tool holders for turret consisting of: turning tool holders (facing, OD and 2 long OD), ID holders (two 2” long, two 1.5” long), sockets (1.5”, 1.25”, 1”, ¾”, 5/8”, ½”, MT4, MT4)
  • Tool box with operating tools
  • Leveling bolts and plates
  • Operation and maintenance manuals
  • Parts list and electronic drawings
  • Fully enclosed work area
  • Door interlock
  • Hydraulic pressure safety switch
  • Spindle interlock
  • Program protect

    • Machine:
    Quantity Item # Description
        HL35 CNC Lathe
    Optional Items:
    Quantity Item # Description
      FemcoChip Chip conveyor
      FemPC Parts catcher
      FemTP Tool presetter
      FemCol Collet chuck
      FemBL Bar loader with auto. load, variuos brands available
      FemBF Bar feeder, 12 ft., various brands available
    Delivery Information
    Please note the following information regarding machine(s) delivery.
    F.O.B. Point Garden Grove, CA
    Delivery Comments: 3-4 days.
    Three Free and Easy Services:
    emachinetool.com provides 3 easy and free services to assist you in your complete buying and selection process. To lean more, Click here.
           

    Home New Conv. Mach. New CNC Mach. Used Conv. Mach. Used CNC Mach. Register
    Accessories Leasing Service Order Tracking
    © 1999-2010, emachinetool.com 262 Eastgate Dr., # 304, Aiken, SC 29803.
    Toll Free Phone: 888-808-0850, Toll Free Fax: 888-808-0861, Phone: 803-480-6629, Fax: 803-753-0117
    Site Created by Revolutionary Systems.