| Home | Register | New CNC | New Conv | Used CNC | Used Conv | Accessories | Leasing | Service | Order Tracking |

Search Here:

Home >> New CNC Machines >> CNC Lathe >> Femco HL25 CNC Lathe

Femco Model HL25 CNC LATHE Specifications: HL25 Specifications: HL25 Chuck size 8"   Swing over bed 17.75" Max. turning dia. 9.84"   Max. turning length 24.8" Tooling 12 pos. turret   X travel 5" Z travel 11"   Spindle bore 2.4" Bar capacity 2.04"   Spindle HP 20/15 Spindle nose A-6"   Spindle RPM 40-4800 No. of speed ranges 1   Tool OD & ID size 3/4x3/4&1.250" Type of ways Linear   Rapid traverse 470X, 630Z ipm CNC control Fanuc OTC   Tailstock quill dia. 3" Tailstock quill travel 3.9"   Programmable tailstock Quill only Net weight 7700 lbs.   Country of Origin Taiwan Delivery Information: 3-4 days. Three Free and Easy Services: emachinetool.com provides 3 easy and free services to assist you in your complete buying and selection process. To lean more, Click here.           FEMCO MODEL HL25 HIGH SPEED PRECISION CNC LATHE Featuring: The HL25 is a powerful, large capacity lathe that can turn small through large lot parts. The huge turret casting incorporates an oversized curvic coupling. The HL25 can cut from 1/16” to 9.8” diameters and up to 23.5” lengths in a wide variety of materials. The 12 station turret is a proven and a mature design. It’s bi-directional turret and selects the shortest path to the next tool thereby minimizing non-cutting time. The main casting housing is oversized casting and incorporates a large curvic coupling. The bed, a solid one piece casting, is made from close grain Meehanite cast iron. The ribbing locations and wall thickness are placed in strategic locations determined by computer finite analysis. This design allows consistent accuracies and excellent finishes. The saddle has a 30-degree incline, directing chips and coolant in to the available chip conveyor. The headstock is made using close grain Meehanite cast iron. It is equipped with six, class 7 precision bearings that are grease lubricated. The large 2.4" spindle hole, permits up to 2” bar stock. The HL25 features a high torque 20/15 HP Fanuc AC spindle motor makes heavy stock removal simple and fast, while minimizing the number of roughing cuts required. This powerful AC digital spindle drive system offers superior spindle acceleration, while maintaining excellent low-end torque. The gearless spindle transmission eliminates spindle vibration for high quality finishes. Both the X and Z axes are driven by Fanuc AC Digital Servo Motors. They are directly coupled to high precision ball screws and supported at both ends, by angular contact thrust bearings. This double supported design assures excellent positioning accuracy, repeatability and minimizes thermal growth. The tailstock is mounted on precision scraped ways, which insure that oil is maintained between the ways and tailstock body. Its large size quill has a 3.9” stroke with Morse taper #4 center. The machine mounted foot pedal activates the standard programmable quill. This provides ease of operator use. Lubrication is automatically metered to the guideways, ballscrews and tailstock quill. Lubrication to these critical areas and the volume is precisely metered. A low lube level alarm is generated, which prevents the machine from restarting, if the level of oil is below its safety level. The HL25 is equipped with a high volume type coolant pump motor. The 12-station turret uses several methods of directing the coolant exactly where it is needed. The tool holders, have been designed to allow the user determine the way the coolant can best be utilized. For ID holders the coolant is directed through the tool (such as needed for deep hole boring applications). The holder can use flexible coolant lines, which come out of the size of the holder. If a sleeve is being used, the operator can direct coolant under or above the tool. For OD holders, the operator simply blocks the ID hole and directs coolant to the OD tool. Specifications: Swing over bed - 17.75” X axis travel – 5” Z axis travel - 23.62“ Distance between centers - 25.59“ Maximum turning diameter - 9.84“ Maximum turning length - 23.62“ Spindle nose - A2-6 Spindle speed - 40-4,800 RPM Spindle power – 20/15 HP Hole through spindle - 2.4“ Bar capacity - 2.04“ Chuck diameter - 8“ Turret type - single disc, bi-directional shortest path Total no. of tools - 12 Tool size OD - 0.750“ Tool size I.D. maximum - 1.25“ Coolant - on the tool or through the tool Coolant tank capacity - 42 Gal. Rapid traverse X axis - 470 IPM Rapid traverse Z axis - 630 IPM Tailstock quill diameter - 3“ Tailstock quill stroke (programmable) - 3.9“ Tailstock spindle taper - MT #4 Tailstock quill thrust (maximum) - 1,200 lbs. Chip conveyor location (conv. opt.) - front or rear Machine dimensions (L x W x H) - 83 x 50 x63" Weight - 7,700 Lbs. Voltage required - 220 volts,3 phase, 60 Hz. Amp Wall Breaker - 80 Amps Full Load Amps – 60 Amps Standard Fanuc OT-C CNC control features: 9" Monochrome CRT Background editing 63 Stored part programs Manual pulse generator Tool geometry and wear compensation (offset) Tool nose radius compensation Automatic tool offset 32 pairs of tool offsets Run hour/ No. of parts display Simultaneously controllable axis: 2 Tape storage length: 60 ft. Registerable programs: 63 Minimum programmable increment: 0.0001" Backlash compensation Self diagnostic functions Positioning rapid (G00) Linear interpolation (G01) Circular interpolation (G02-G03) Tool nose radius compensation (G40 G41 G42) Multiple repetitive cycles (G70,G71,G72,G73,G74,G75,G76) Canned cycles (G90,G92,G94) Reference point return (G27,G28,G29,G30) Plane selection (G17,G18,G19) Inch/Metric conversion (G20,G21) Thread cutting (G32) Coordinate system setting Max. spindle speed (G50) Dwell (G04) Constant surface speed (G96,G97) Feed per minute (G98) Feed per revolution (G99) Auto. tool comp. X & Y (G36,G37) Auto. tool tip function Clock function Single block Block delete Dry run Optional stop Edit lock Standard machine items: Fast bi-directional turret indexing Compact design requires minimal space 8" 3 jaw hydraulic chuck with hard top jaws Hydraulic actuator Hydraulic system Hydraulic tailstock with programmable quill Live center Work light Automatic lubrication system Coolant system (42 gallon capacity) Full chip and coolant enclosures Complete set of tool holders for turret consisting of: 1 set wedge clamp for face holder, 6 sets 1-1/4" boring bar holders, boring bar bushings (3/8”, two ½”, two 5/8”, ¾”, 1”) Tool box with operating tools Leveling bolts and plates Operation and maintenance manuals Parts list and electronic drawings Fully enclosed work area Door interlock Hydraulic pressure safety switch Spindle interlock Program protect Chucking signal Machine: Quantity Item # Description     HL25 CNC Lathe Optional Items: Quantity Item # Description   FemcoChip Chip conveyor   FemPC Parts catcher   FemTP Tool presetter   FemCol Collet chuck   FemBL Bar loader with auto. load, variuos brands available   FemBF Bar feeder, 12 ft., various brands available Delivery Information Please note the following information regarding machine(s) delivery. F.O.B. Point Garden Grove, CA Delivery Comments: 3-4 days. Three Free and Easy Services: emachinetool.com provides 3 easy and free services to assist you in your complete buying and selection process. To lean more, Click here.         Home New Conv. Mach. New CNC Mach. Used Conv. Mach. Used CNC Mach. Register Accessories Leasing Service Order Tracking © 1999-2010, emachinetool.com 262 Eastgate Dr., # 304, Aiken, SC 29803. Toll Free Phone: 888-808-0850, Toll Free Fax: 888-808-0861, Phone: 803-480-6629, Fax: 803-753-0117 Site Created by Revolutionary Systems.