emachinetool.com
1-888-808-0850info@emachinetool.com
 | Home | Register | New CNC | New Conv | Used CNC | Used Conv | Accessories | Leasing | Service | Order Tracking |

Building Trust in Transactions (tm)
Search Here:
Credit Cards
Home >> New Conventional Machines >> Mini Vertical Mill >> Proxxon FF230 Mini Vertical Mill

PROXXON MINI MILL MODEL # FF230

Featuring:

  • The micro milling machine FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic
  • The headstock swivels through 360º
  • The quill and headstock may be locked in position, which is suggested/required when milling
  • The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds
  • Comes with three collets 15/64, 5/16 and 25/64"
  • Column Size 1 3/8" x 15 3/4" long
  • Overal height - 20"
  • Approx. weight - 41 lbs
  • All screws and dials are Metric
  • Ships UPS
Photo Details:
1.Hand wheel for both height adjustment and fine mill feed
2.Poly-V drive offers 6 speeds, 280-2,500 rpm
3.The clamps and work piece shown are optional/not included
4. Hand wheels with zero adjustable scale, 1 rev.=1/32", 1 div.=0.002"
Standard Equipment:
  • 3 collets
  • XY table with T slots
  • Headstock locking levers
  • Note: The min. lease amount is $5000.00. Therefore multiple quantities of the item would need to be purchased to qualify for on-line leasing - Thank you
Note: Photo shows optional items below machine and on table
Specifications: FF230
Table size 10.62x3.15"
Long. travel 6.68"
Cross travel 2.56"
Spindle travel 7.87" (headstock)
Spindle speed (6)280-2500 RPM
Swivel of head 360 Degrees
Spindle motor 140 Watts, 0.2 HP
Net weight 41 lbs
Delivery Information:
1-2 Working Days
 
Machine:
Quantity Item # Description List Dis. Price
FF230 Mini Vertical Mill $ 1,325.00 20% $ 1,060.00
Optional Items:
Quantity Item # Description List Dis. Price
  24030 Proxxon 4 jaw chuck, 3.1" cap. $ 272.00 8% $ 250.24
  24131 Proxxon dividing attachment, w/2 disks allowing div. of 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40, 48. 3 or 4 jaw chuck can be mounted on this as well. $ 325.00 8% $ 299.00
  24140 Proxxon fine feed for milling unit, easily installed, feed via vert. or tilted pos., 1 rev.=0.05" spindle travel, 1 div.=0.002", grad. scale $ 145.00 8% $ 133.40
  24257 Proxxon step clamp set (pair) w/2 nuts & T-slot nuts, secures pcs. approx. 1.4" high $ 56.50 8% $ 51.98
  24262 Proxxon precision V-blocks, 2 pcs, hardened steel, 4 V depthd at 90 deg., 2x1.2x1.2" $ 57.50 8% $ 52.90
  24256 Proxxon pair of clamps for T slots, brinelled steel, adj. from 0.24-1.6" $ 31.50 8% $ 28.98
  24610 Proxxon 4 piece milling cutter set (2,3,4, and 5 mm) $ 77.50 8% $ 71.30
  24620 Proxxon 4 piece milling cutter set (6,7,8, and 10 mm) $ 77.50 8% $ 71.30
  24630 Proxxon 3 piece drill set (2,2.5 and 3.15 mm) $ 14.80 8% $ 13.62
  24110 Proxxon Drill Chuck, capacity to 13/32" (10 mm) $ 49.00 8% $ 45.08
  24144 Proxxon Collet Set (2.4, 3, 3.2, 4, 5 mm) $ 145.00 8% $ 133.40
  24255 Proxxon precision vise, machined in steel, 2-23/64" $ 97.00 8% $ 89.24
Calculate Your Savings:
Just enter the quantities you wish to purchase above, click the 'Calculate' button below, and your base cost and savings will be totaled.
List Price Your Price
Your Savings  
Estimate Your Lease:
If you plan on leasing your machine(s), you may obtain an estimate of your lease payments by filling in the form below and clicking 'Calculate'. The payments are based on our current leasing rates for USA purchasers (payments for non-USA purchasers may be slightly higher), and assume lease approval.
Select the number of months of the term of the lease:
Select Buy Back:
 
Your monthly payment will be:
Your advance payment will be:
Voltage Information
Machine available only in 110 Voltage setup.
Delivery Information
Please note the following information regarding machine(s) delivery.
F.O.B. Point NC
Delivery Comments: 1-2 Working Days
Three Ways to Order:
You may arrange to purchase this item in one of three ways. Simply select your purchase method below, and click 'Place Order' to begin the ordering process. If you wish to read more about our payment methods, please proceed to our payment information page.
Credit Card Check Lease

Home New Conv. Mach. New CNC Mach. Used Conv. Mach. Used CNC Mach. Register
Accessories Leasing Service Order Tracking
© 1999-2013, emachinetool.com 262 Eastgate Dr., # 304, Aiken, SC 29803.
Toll Free Phone: 888-808-0850, Toll Free Fax: 888-808-0861, Phone: 803-648-7998, Fax: 803-648-6118
NJ Website Design by RevSystems